Products construction technology

  • Adhesives

    Fasatan TFS

    Fasatan TFS is a soft elastic single component adhesive sealant. Fasatan TFS has an early resistance to water and vulcanises to a soft elastic, rubber-like plastic in the presence of atmospheric moisture. This material has an excellent resistance to the weather and to chemicals. Fasatan TFS is free of solvents, isocyanate, silicone and PCP and exhibits extremely low shrinkage. Fasatan TFS quality has been tested to DIN 4102 Part 1 and is classified as normal flammability (DIN 4102-B2) building material, when Fasatan TFS is used to glue our building sealing foils Fasatan, Fasatyl and Fasatan eco to steel, wood or solid mineral substrates. Fasatan TFS is subject to the strict requirements for voluntary independent monitoring by the testing institute.

     

    TFK

    FASATAN-TFK contact adhesive with particularly advantageous viscosity in application. For application on both surfaces, foil and substrate. Fasatan TFK is a ready to use contact adhesive primarily for gluing our EPDM and butyl sealing foils Fasatan and Fasatyl in window and façade construction and also for gluing the seams of these foils. Fasatan TFK has very strong adhesive qualities, both between Fasatan or Fasatyl foils and between these foils and suitable substrates to which they are glued. For application on both surfaces, foil and substrate. Using a brush, lamb skin roller or by airless sprayer. The bond is elastic and waterproof.

     

    TFU

    Fasatan TFU is a polyurethane-based single component, elastic, firm, bubble-free adhesive / sealing compound especially for gluing our building sealing foils Fasatan and Fasatyl on conventional building substrates, especially behind curtain wall façades. Fasatan TFU contains no acid or isocyanate and does not require labelling; it is therefore neutral in terms of substrate and odour. Fasatan TFU vulcanises into a permanent elastic substance through absorption of atmospheric oxygen.

     

    Winfix

    Winfix is a solvent-free, elasto-plastic, single component polymer dispersion adhesive for Winflex interior / exterior. It is used for gluing Winflex interior / exterior, version A, in the window embrasure where it serves as seam paste for all our window abutment tapes. Winfix adhesion to conventional construction substrates such as concrete, plaster, brickwork, cement and wood, including building components such as window frames and window sills, is excellent. Winfix has been quality tested by the MPA NRW [Material Testing Authority North Rhine-Westphalia] for a defined value of µ, rendering it particularly suitable as adhesive and seam paste for fast and reliable sealing of abutment gaps on windows and external doors according to the guidelines of the RALGütegemeinschaft [RAL Quality Assurance Association] and DIN 4108-7, using our window abutment tapes.

     

    Winflex TFS

    Winflex TFS is a soft elastic single component adhesive sealant. Winflex TFS has an early resistance to water and vulcanises to a soft elastic, rubber-like plastic in the presence of atmospheric moisture. This material has an excellent resistance to the weather and to chemicals. Winflex TFS is free of solvents, isocyanate, silicone and PCP and exhibits extremely low shrinkage. Winflex has been quality tested by the MPA NRW [Material Testing Authority North Rhine-Westphalia] for a defined value of µ, rendering it particularly suitable as adhesive and seam paste for fast and reliable sealing of abutment gaps on windows and external doors according to the guidelines of the RALGütegemeinschaft [RAL Quality Assurance Association] and DIN 4108-7, using our window abutment tapes.

  • Balcony construction

    Balkotec C / XXL

    The compact balcony slab. The ideal balcony slab, especially for new constructions, renovations and refurbishment. Easy to install and weather-proof.

    Click here for further information.

     

    Balkotec B

    The decorative balustrade panel. The balustrade panels are available in many colour hues. The special surface assures low dirt retention and it is resistant against weather and UV radiation.

    Click here for further information.

     

    Balkotec T

    The alternative step cover. The step for exterior staircases is an alternative to natural or artificial stone covers. The anti-slip nosing enables safe treading.

    Click here for further information.

  • Construction plate

    Phonotherm

    When conventional construction elements such as wood, plastic and metal reach their limits, resort to Phonotherm 200. Imagine obtaining a construction board without compromise, which you may use for many applications without any concerns. This is no dream, it is PURe reality!

    Click here for further information.

     

    Epoflex

    Epoflex is manufactured from high-grade Pre-preg material. Among other, it is used as a semi-finished product to manufacture high-strength components (e.g. partitioning systems, covers). As a composite material, Epoflex is characterised by its high strength and rigidity. Tensile and compressive loads are absorbed by the fibres whilst the matrix absorbs shear forces.
    The significantly lower weight, compared to steel for instance, is a further advantage of this composite material. Furthermore, Epoflex is corrosion-free and highly resistant to chemicals. Epoflex is also thermally and electrically insulating.

  • Profile filler

    Microlen PE

    Microlene is a high quality polyethylene foam. It is manufactured and cross-linked under pressure at high temperature. A very fine and uniform cell structure is achieved. Microlene is highly elastic and water repellent and can be applied in many areas due to its varying density.
    With adhesive layer on one side, used as profile filler in metal construction for instance. Microlene can be moulded into any desired shape. The special properties allow the product to be laminated and coated.

  • Renovation of old buildings

    Combband 300

     

    Combo tape 300, the specially impregnated and pre-compressed gap sealing tape, has properties that find many applications in modern construction, where the demands for reliable gap solutions are more significant today than just a few years ago. This is a vapour permeable material, which significantly reduces the risk of wood rot and fungal attack in adjacent material. In compressed form, Combo tape 300 reliably seals against sound, driving rain, dust, draught and loss of heat.
    Combo tape 300 falls into Stress group BG2 under DIN 18 542 and was developed especially for gaps in low rise buildings up to 20 m high. It is strongly self-adhesive on one side to assist with assembly, compatible with all conventional sealing substances and can be applied irrespective of temperature. A non-tearing, siliconised foil covers the self-adhesive layer for optimal workability.

     

     

    Phonotherm

    When conventional construction elements such as wood, plastic and metal reach their limits, resort to Phonotherm 200. Imagine obtaining a construction board without compromise, which you may use for many applications without any concerns. This is no dream, it is PURe reality!

    Click here for further information.

     

    Winflex Inside / Outside

    The plastic foil embedded between the outer fleece layers enables energy-saving technology. The special plastic compound worked into the system follows the movements of the building structure. The result: the plaster surface can no longer crumble or crack and the joint remains tight.

    1. Fleece as blaster space: The gypsum or plaster is applied on the fleece.
    2. High quality plastic foil: The embedded plastic foil comes in two types: open to vapour diffusion (exterior) and closed to vapour diffusion (interior).
    3. Fleece layer:This additional fleece layer allows for the application of adhesive to glue the sealing foil to the masonry.
    a) a) SK adhesive strips:
    WINFLEX is attached to the window frame using self-adhesive strips.
    b) b) Butyl adhesive strips:
    Butyl adhesive strips durably and reliably attach WINFLEX to the masonry.
    But you may also use the proven WINFIX ADHESIVE to individually apply the WINFLEX sealing solution in the window area!

     

    Rolaflex

    ROLAFLEX roller insulation is a flexible, open-cell foam material made of melamine resin, a thermosetting plastic in the aminoplast group. Its typical characteristic is the filigree, spatial mesh structure, formed by slender, easily deformable ribs. ROLAFLEX roller insulation is available in grey.

  • Repair and sealing tapes

    Alubutyl

    Aluminium coated butyl, adhesive coating on one side. Ideal for sealing chimneybreasts, light domes, porch roof abutments, ventilation ducts, winter gardens and other abutments on the building structure. Is UV resistant and suited for interior or exterior use.

     

    Alubutyl special

    The tape with the protruding aluminium foil! Deployable like Alubutyl, strongly adhesive and durable. Both the tape and the wide surface foil can be drilled. Because the covering paper is wider, it can be peeled off easily.

     

    Lead butyl

    Lead coated butyl, adhesive coating on one side. Ideal for sealing on flashings, upstands, break-throughs, windows and parapets. Other areas of application are in the roof, on downpipes, lead strips and metal covers. Is UV resistant and suited for interior or exterior use.

     

    Butyl DS

    The highly adhesive butyl sealing tape. Glues and seals on both sides. Suited especially for durable gluing of different materials. Is solvent-free, remains elastic, turns neither hard nor brittle and does not in any way spoil the treated surface.

     

    Cold shrink tape

    Stretchable tape made of cold self-adhesive butyl rubber adhesive covered with an aluminium coloured, highly tear resistant polyethylene foil with a 400% expansion ratio. The cold shrink tape has normal flammability, Building material class B2 of DIN 4102. It is excellently suited, for instance, for sealing and insulating pipework in building construction and in the air conditioning and ventilation fields.

     

    Fleece butyl

    Fleece coated butyl, adhesive coating on one side. Many applications! The fleece layer allows the tape to be easily plastered over. Ideal for repair work to joints, seams, cracks and fractures. Other fields of application are in the roof area, in glass, ventilation, pipework and metal construction.

  • Roof elements

    Aeroflex 200

    This universally applicable sealing tape can be used on all roof sealing materials such as concrete or clay tiles. Through perfect matching of materials, the system is very resistant to both cold and heat. This enables the unlimited functionality of the roll ridge.

     

    Aeroflex 300

    The sealing tape is virtually unassailable thanks to its varnished aluminium design, and is also resistant to aging. The system thereby offers protection against UV radiation, ozone and the weather. Reliable ventilation is enabled through the above average ventilation apertures.

     

    Aeroflex 400

    The formulation makes it possible! Elastomer rubber in combination with sturdy metal tapes of aluminium or copper protects against all attacks and against aging. The effect has advantages: Protection against UV radiation, ozone and other environmental effects.

     

    Aeroflex 500

    The product offers interesting properties such as the special stitching together of the aluminium or copper tapes and edges folded over. This guarantees an absolutely reliable solution for the roof. The excellent possibility for ventilation with modern flat and large-format tiles is another advantage.

     

    Aluflex

    Aluflex is a sealing strip with self-adhesive coating on one side made of profiled aluminium. It is also the optimal and fast alternative to sheet metal and lead flashings at all typical abutments.

     

    Kamoflex

    Kamoflex ist die intelligente Lösung für Anschluss- und Abdichtungsarbeiten an Kaminen, Wänden und anderen aufsteigenden Bauteilen. Durch die Vielzahl möglicher Knickstellen ist Kamoflex an alle denkbaren Formen ideal anpassbar.

     

    Rooflex

    Rooflex is a lead-free and therefore healthy sealing system solution. The laminated butyl adhesive ensures durable adhesive strength. Rooflex is five times as light as lead-containing seals and is extremely colour-fast due to its metallic surface.

  • Round profiles

    Round profile HS

    The polyester-based open-cell hard polyurethane profile is suited as back filler material for gaps of all kinds and especially for gaps of different widths, since the profile allows higher deformation under pressure.

     

    Round profile PE

    SB-flex PE grey is a polyethylene foam with reliably closed cell structure expanded into a round cord. The advantageous properties of the expanded polyethylene, such as high elasticity and adaptability and easy application in respect of shaping and the outer skin renders SB-flex PE grey the ideal back-up material for sealing the building at abutments of the same or different materials. SB-flex PE grey complies with the technical requirements for back-up material to seal the gaps in accordance with Points 2 and 3 of DIN 18 540.

     

    Round profile PUR

    The polyester-based open-cell hard polyurethane profile is suited as back filler material for gaps of all kinds and especially for gaps of different widths, since the profile allows higher deformation under pressure.

  • Sealing tapes

    Fasatan / Fasatyl

    are elastic sealing foils for structure connections in façade construction. Fasatan is a vapour permeable façade sealing membrane made of high quality synthetic EPDM rubber. Although it blocks water, draught and other influences, it allows water vapour to diffuse out of the structure. Fasatyl is the counterpart to Fasatan. It is applied on the inside, since it is necessary to achieve sealing not allowing vapour diffusion here. The sealing membrane is made of high-elasticity butyl rubber.

    Together, the two façade sealing systems are in intelligent harmony and create an all-round perfect sealing solution. The sealing foils are supplemented by mutually coordinated accessory materials and adhesives. Click here for the accessories.

    The façade sealing system is also available as a Fix system with a butyl adhesive strip in different versions and as a keder system with welded-on keder for different profiles.

    Click here for further information.

     

    Winflex Inside / Outside

    The plastic foil embedded between the outer fleece layers enables energy-saving technology. The special plastic compound worked into the system follows the movements of the building structure. The result: the plaster surface can no longer crumble or crack and the joint remains tight.

    1. Fleece as plaster base: The gypsum or plaster is applied on the fleece.
    2. High quality plastic foil: The embedded plastic foil comes in two types: open to vapour diffusion (exterior) and closed to vapour diffusion (interior).
    3. Fleece layer:This additional fleece layer allows for the application of adhesive to glue the sealing foil to the masonry.
    a) a) SK adhesive strips:
    WINFLEX is attached to the window frame using self-adhesive strips.
    b) b) Butyl adhesive strips:
    Butyl adhesive strips durably and reliably attach WINFLEX to the masonry. But you may also use the proven WINFIX ADHESIVE to individually apply the WINFLEX sealing solution in the window area!

     

    Winflex Trisave

    Until now, the installation of windows required many time consuming and therefore expensive steps. It is really simple these days, requiring only one operation irrespective of the weather.

    With Winflex TriSave, the sealing effort in compliance with the standard has been reduced to a single operation. The salient feature of our high-grade Winflex TriSave system is the uncomplicated, time-saving, simple and reliable installation, enabling window installation in a single operation. The single-sided installation aid is easy to attach to the window frame and provides optimal support during window installation.

    Click here for further information.

  • Thermal insulation

    Neopolene window sill insulating wedge

    The neopolene insulating wedge consists of semi-hard foam. This material is excellently suited for the manufacture of thermally insulating moulded products, due to its good thermal insulation properties, its easy moulding to surfaces and its low water absorption.
    It is also possible to weld together abutting parts simply by using a hot air blower.

     

    Rolaflex

    ROLAFLEX roller insulation is a flexible, open-cell foam material made of melamine resin, a thermosetting plastic in the aminoplast group. Its typical characteristic is the filigree, spatial mesh structure, formed by slender, easily deformed ribs. ROLAFLEX® roller insulation is available in grey.

    Click here for further information.